It tells the SP Flash Tool which binary files (.img or .bin) correspond to which partition and whether they should be "downloaded" to the device.
partition unless the device is completely hard-bricked. Flashing an incorrect preloader can permanently disable the device's ability to communicate with a PC. Scatter Generation mt6589 android scatter emmc
You replaced a 4GB eMMC with an 8GB one. The original scatter file ends FAT at 4GB. The kernel panics because it expects eMMC to stop at 4GB. Edit scatter file – increase linear_end_addr for FAT to match new eMMC total sectors minus 512MB for userdata. It tells the SP Flash Tool which binary files (
is the internal storage chip soldered onto the MT6589 device’s motherboard. Unlike UFS found in modern phones, eMMC uses the older MMC protocol over a parallel interface. For the MT6589, eMMC versions typically range from 4.41 to 5.0. Scatter Generation You replaced a 4GB eMMC with an 8GB one
The file lists each partition with its specific attributes. A typical entry for the partition might look like this:
Read the partition table using cat /proc/emmc or cat /proc/dumchar_info .