Despite its name containing “38”, some users mistakenly believe it can accept 4.5-inch (115 mm) cutting wheels. This is incorrect. The FD Tool 38 is a precision tool, not a demolition grinder.
| Problem | Possible Cause | Solution | |---------|----------------|----------| | Tool runs slow | Low air pressure or dirty air filter | Adjust regulator to 90 PSI; clean filter | | Excessive vibration | Bent accessory shank or worn collet | Replace accessory; replace collet | | No power under load | Worn rotor vanes | Disassemble motor and install new vane set | | Air leaking from trigger | Worn O-rings | Replace O-ring kit (standard size 4.0 x 1.5 mm) | fd tool 38
When equipped with a 38 mm reinforced cut-off wheel (typically 1.0 mm to 1.6 mm thick), the FD Tool 38 can slice through bolts, sheet metal, rivets, and thin tubing where a reciprocating saw or large grinder cannot fit. Despite its name containing “38”, some users mistakenly
: Oil Reset, EPB (Electronic Parking Brake), SAS (Steering Angle Sensor), ABS Bleeding, and Injector Coding. Guide for Use : | Problem | Possible Cause | Solution |
Searches up to a depth of 2 directories from your home.