Cerwin Vega At40 Specs [2021] -

| Specification | Detail | | --- | --- | | | 3-way, bookshelf / stand-mount monitor, bass reflex | | Woofer | 8" (203mm) cast polymer frame, high-excursion, butyl rubber surround | | Midrange | 4" (100mm) treated paper cone with sealed back chamber | | Tweeter | 1" (25mm) soft dome ferrite magnet (some variants had a phenolic ring radiator) | | Frequency Response | 45 Hz – 20 kHz (± 3 dB) | | Sensitivity | 91 dB (1W/1m) | | Nominal Impedance | 8 ohms (minimum 5.2 ohms @ 120 Hz) | | Power Handling (RMS) | 75 watts | | Power Handling (Peak) | 150 watts | | Crossover Frequencies | 600 Hz and 4,500 Hz | | Enclosure Tuning | 45 Hz (ported, rear-firing slot port) | | Dimensions (H x W x D) | 19.25" x 11.25" x 9.5" (489 x 286 x 241 mm) | | Weight (per speaker) | 28 lbs (12.7 kg) | | MSRP (1990) | $400/pair |

With a 95 dB sensitivity rating, these speakers can reach high volumes even when paired with relatively modest amplifiers. Signature Sound: cerwin vega at40 specs

The is a vintage three-way floorstanding speaker from the "AT" (Advanced Technology) series, produced in the late 1980s and early 1990s. Known for its high efficiency and "party speaker" reputation, it was designed to deliver high volume levels even with relatively low-powered amplifiers. Key Technical Specifications Specification System Type 3-way bass reflex (ported) Frequency Response 30 Hz – 22 kHz Power Handling 125 Watts (RMS/Maximum) Sensitivity 95 dB (1W/1m) Impedance Crossover Points 400 Hz and 3000 Hz Protection PTC (Self-resetting tweeter protection) Dimensions (H x W x D) 730 x 365 x 320 mm (approx. 28.7" x 14.4" x 12.6") Driver Configuration | Specification | Detail | | --- |

45Hz. The Reality: Measurable output down to 42Hz, but with a steep drop below 50Hz. The rear-firing slot port requires at least 6 inches of space behind the speaker. Place them near a wall, and the bass jumps to a hearty 48Hz at usable levels. They won't shake your teeth, but for an 8" monitor, the kick drum has genuine thwack . The rear-firing slot port requires at least 6