: The unit maintains tight control with a basic error of

Temperature fluctuates wildly. Solution: Run Auto-Tune (Part 6). Also set T (cycle time) to 2 seconds if using SSR. xmtd-2201 manual

| Parameter | Value | |-----------|-------| | Power supply | 100–240V AC 50/60Hz or 24V DC | | Input type | K, J, E, T, S, PT100, 0–10V, 4–20mA | | Output type | Relay (3A/250V), SSR drive (12V/30mA), linear | | Accuracy | ±0.5% FS ±1 digit | | Sampling rate | 2–4 Hz | | Control mode | ON/OFF, PID, auto-tuning | | Alarm | 1 or 2 relays (high/low/deviation) | | Working temp | 0–50°C | | Dimensions | 48×48×90 mm (DIN standard) | : The unit maintains tight control with a

Xmtd-2201 Manual [LATEST]

: The unit maintains tight control with a basic error of

Temperature fluctuates wildly. Solution: Run Auto-Tune (Part 6). Also set T (cycle time) to 2 seconds if using SSR.

| Parameter | Value | |-----------|-------| | Power supply | 100–240V AC 50/60Hz or 24V DC | | Input type | K, J, E, T, S, PT100, 0–10V, 4–20mA | | Output type | Relay (3A/250V), SSR drive (12V/30mA), linear | | Accuracy | ±0.5% FS ±1 digit | | Sampling rate | 2–4 Hz | | Control mode | ON/OFF, PID, auto-tuning | | Alarm | 1 or 2 relays (high/low/deviation) | | Working temp | 0–50°C | | Dimensions | 48×48×90 mm (DIN standard) |