Ecus Datasheet 3.0 Page

]

This document provides an overview of the ECU Configuration specification as defined in the AUTOSAR Classic Platform Release 3.0 standard. It details the methodology for configuring an Electronic Control Unit (ECU), the relationship between the System Configuration and the ECU Configuration, and the structure of the ECU Configuration Description. This paper serves as a guide for understanding the inputs, outputs, and constraints involved in the ECU design phase. ecus datasheet 3.0

| Symptom | Datasheet Reference | Likely Cause | | :--- | :--- | :--- | | ECU does not power on | Section 4.1 (Power) | Reverse polarity or blown main fuse. Check Pin A1. | | No CAN Communication | Section 3.4 (Comms) | Incorrect termination (requires 120Ω). Check CAN_H/CAN_L swap. | | Sensor reading "0.5V" stuck | Section 2.2 (ADC) | Input pin set to "Pull-up" mode internally. Configure as floating. | | Overheating | Section 4.3 (Thermal) | High current driver overloaded or short circuit to ground. | ] This document provides an overview of the