Troubleshooting the "DVB Select Type" Error on Samsung TVs Seeing a "DVB select type" error or prompt on your Samsung TV can be frustrating, especially when it prevents you from accessing your favorite digital channels. This issue typically occurs during initial setup, after a software update, or when the TV's internal tuner loses its configuration. DVB (Digital Video Broadcasting) is the international standard for digital television. When your TV asks you to "select type," it is essentially asking which digital signal standard it should use to scan for channels: DVB-T (Terrestrial/Antenna), DVB-C (Cable), or DVB-S (Satellite). Here is a comprehensive guide to understanding and fixing this error. 1. Understanding the DVB Options Before troubleshooting, identify which signal source you are actually using. Selecting the wrong type is the most common cause of "no channels found" or persistent error messages. DVB-T / DVB-T2 (Air/Antenna): Use this if you have a physical aerial or "bunny ears" antenna connected to the coaxial port . DVB-C (Cable): Use this if you have a cable wire coming directly from your wall (without a separate set-top box). DVB-S / DVB-S2 (Satellite): Use this if you have a satellite dish connected directly to the "Satellite" input on the back of the TV. Samsung re-tune your TV - video 1
It sounds like you're encountering a "DVB Select Type Error" on your Samsung TV. This typically happens when the TV's tuner is set to the wrong DVB standard for your region or when scanning for channels. Here's how to fix it: 1. Check Your TV's DVB Setting
Go to Menu > Broadcasting > Expert Settings (or Channel Settings ) Look for "DVB Type" or "Tuner Type" Select the correct option for your region:
DVB-T/T2 – for terrestrial (antenna) TV DVB-C – for cable TV DVB-S/S2 – for satellite (if connected to a dish) dvb select type error samsung tv
2. Perform a Fresh Channel Scan
Menu > Broadcasting > Auto Tuning (or Auto Program ) Choose the correct Signal Source (Air/Antenna, Cable, or Satellite) Start scan
3. Check Your Antenna/Cable Connection
Ensure the coaxial cable is securely connected to the RF IN port Try a different cable For DVB-C: ensure your cable provider’s settings (frequency, symbol rate, network ID) are correct
4. Reset the TV's Tuner
Menu > Support > Self Diagnosis > Reset (or Factory Reset from General settings) This will reset all settings, including tuner configuration When your TV asks you to "select type,"
5. Region Mismatch
Menu > System > Country (or Broadcasting > Country ) Make sure the country is set correctly for your location