: Use 7H/8f or 9H/9g . Ideal for removable parts.
| Dimension | Formula | Notes | | :--- | :--- | :--- | | | $m$ | Basic parameter | | Number of Teeth | $z$ | Basic parameter | | Reference Diameter | $d_B$ | $m \times z$ | | Base Circle Diameter | $d_b$ | $d_B \times \cos(30^\circ)$ | | Tip Diameter (External) | $d_a$ | $d_B + 2 \times m \times (h_aP^* + x)$ | | Root Diameter (External) | $d_f$ | $d_a - 2 \times h$ (varies by root fit) | | Circular Tooth Thickness | $s$ | $\fracm \times \pi2 + 2 \times x \times m \times \tan(\alpha_D)$ | din 5480 spline dimensions pdf verified
| Parameter | Symbol | Description | Verification Checkpoint | | :--- | :--- | :--- | :--- | | | m | Basic tooth size (mm) | Must match standard series (e.g., 0.5, 0.6, 0.8, 1, 1.25, 1.5, 2...10) | | Reference Diameter | d(_B) | Ideal calculation diameter | Equals m * z (rounded to preferred numbers) | | Tip Diameter (Shaft) | d(_a) | Outer diameter of external spline | Verify against table for given module/z | | Root Diameter (Shaft) | d(_f) | Base of teeth | Critical for stress analysis | | Form Diameter | d(_Ff) | Start of involute profile | Must be below start of active profile | | Space Width (Internal) | e | Width of groove in hub | Tolerance dependent on class (e.g., 8f, 9H) | | Tooth Thickness (External) | s | Width of tooth on shaft | Measured over pins or via gear measurement | : Use 7H/8f or 9H/9g