| LCD I2C Pin | Arduino Uno Pin | Proteus Net Label | |-------------|----------------|-------------------| | VCC | 5V | VCC | | GND | GND | GND | | SDA | A4 (or SDA) | SDA | | SCL | A5 (or SCL) | SCL |
Note: In Proteus, if using a pre-made I2C LCD model, these connections are internal. If building manually, you must wire these pins as per the table above. jhd-2x16-i2c proteus
To successfully simulate the JHD-2x16-I2C in Proteus, the following connections are required between the PCF8574 and the LCD (LM016L). | LCD I2C Pin | Arduino Uno Pin
To use the JHD-2x16-I2C display in Proteus, follow these steps: follow these steps: