The "Manual Alpina IT 31015" is the factory-issued document that contains exploded parts diagrams, safety warnings, assembly instructions, operating procedures, and detailed maintenance schedules. It is the ultimate authority for this machine.
| Frequency | Task | | :--- | :--- | | | Vacuum dust from the chip chute. Check for loose screws. | | Every 10 hours | Lubricate the threaded thicknessing rod with lithium grease. | | Every 30 hours | Remove the top cover and blow out motor housing with compressed air. | | Every 50 hours | Inspect drive belts for cracking. Replace in pairs. | | Blade Change | Rotate or replace carbide blades after 100 linear meters of hardwood, or immediately if you see burn marks on the wood. | Manual Alpina It 31015
A: The manual says no . The cutter head speed is calibrated for the mass of carbide blades. HSS blades are lighter and can spin too fast, leading to chatter or blade ejection. The "Manual Alpina IT 31015" is the factory-issued