Hp Mu06 Notebook Battery Pinout Configuration < 1080p >

The HP MU06 is a 3-cell Lithium-Ion (Li-Ion) prismatic battery pack designed for mid-range HP consumer laptops. It operates on a compliant architecture, utilizing an I²C communication bus for data transfer between the battery management system (BMS) and the laptop’s EC (Embedded Controller).

Often reserved or not used in standard charging configurations. VBAT (Positive) Main power output pins (+10.8V nominal for the MU06). Key Technical Details Hp Mu06 Notebook Battery Pinout Configuration

The HP MU06 battery follows a standard 7-pin SMBus configuration where Pins 1,2 = Ground; Pins 6,7 = Positive; Pin 5 = Presence Detect; Pins 3,4 = SMBus Clock/Data. The BMS implements strict safety and lockout features. Unauthorized cell replacement or improper voltage application on the SMBus lines will likely trigger a permanent failure lock. For reverse engineering or repair, always use an isolated SMBus adapter and monitor cell balance before attempting to reset the BMS. The HP MU06 is a 3-cell Lithium-Ion (Li-Ion)