| Problem | Likely cause | Fix | |---------|--------------|-----| | tar: bad magic | Corrupted download | Re-download from Cisco, check MD5 | | TFTP timeout | Firewall or wrong server IP | Use wireshark to see TFTP port 69 | | AP reboots repeatedly | Wrong image for HW rev | Check AP model: 1700/2700 use ap1g2, 2800/3800 use ap3g2 | | flash is full | Too many old images | ap: flash_init; delete flash:/old-image |
One of the most frequent uses for the ap1g2-k9w7-tar image is the conversion of surplus or "Lightweight" hardware into "Autonomous" mode. This is particularly common in smaller offices or home labs where a dedicated controller is unnecessary or cost-prohibitive. The conversion typically involves setting up a and using the access point’s mode button or CLI to fetch and install the image. This transformation effectively "liberates" the hardware, granting it the intelligence to manage its own security, SSIDs, and client associations. Conclusion Ap1g2-k9w7-tar
The AP will automatically search for the .default file at 10.0.0.1 and install it. Important Availability Note | Problem | Likely cause | Fix |
: